ShopBot

Technical  Q & A

Hooking Up Z-Zero Plate

Black goes to Input 1, green/blue goes to Ground, and red/brown goes to any of the +5 terminals (only needed for an accessory like a probe). These can be hooked to the terminal blocks by loosening the screw with a small flat head screwdriver, inserting the stripped wire end, and tightening the screw back down. Make sure there is a good connection to the wire (don?t insert the wire far enough for the screw to clamp down on the plastic insulation).

Standard Wiring Diagram (Different for Desktop and Alpha):

Need additional information? Let us know

Share this answer:

ShopBot Tools, Inc.

Toll Free: 1-888-680-4466

Phone: 919-680-4800
Fax: 919-680-4900

ShopBot Tools, Inc.
3333-B Industrial Drive
Durham, NC 27704
USA

Office Hours
Monday–Friday: 9am–5pm EST

After Hours Tech Support
Monday–Friday: 5pm–9pm EST
Saturday–Sunday: 8am–9pm EST

Office Closure
ShopBot Tools, Inc. is closed New Year’s Day, Memorial Day, July 4th, Labor Day, Thanksgiving Day and the following Friday, and Christmas Eve and Christmas Day.

Outside of normal office hours, we regularly check for support requests, email and phone messages. To make sure we can get back to you as soon as possible, leave a phone number or return email address where you will be available.